您的位置: 标准下载 » 国内标准 » GB 国标 »

GB 28376-2012 隧道防火保护板

作者:标准资料网 时间:2024-05-14 03:36:14  浏览:8566   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:隧道防火保护板
英文名称:Fireproof board for tunnels
中标分类: 医药、卫生、劳动保护 >> 消防 >> 消防设备与器材
ICS分类: 环保、保健与安全 >> 消防 >> 建筑材料和构件的阻燃性
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2012-05-11
实施日期:2012-09-01
首发日期:2012-05-11
作废日期:
主管部门:全国消防标准化技术委员会防火材料分技术委员会(SAC/TC 113/SC 7)
提出单位:中华人民共和国公安部
归口单位:全国消防标准化技术委员会防火材料分技术委员会(SAC/TC 113/SC 7)
起草单位:公安部四川消防研究所、交通部公路科学研究院等
起草人:袁亚利、程道彬、聂涛、毛朝君、濮爱萍、王鹏翔、余威、张才、姚建军、刘恒权、曾绪斌
出版社:中国标准出版社
出版日期:2012-09-01
页数:20页
适用范围

本标准规定了隧道防火保护板的术语和定义、产品分类、要求、试验方法、检验规则和包装、标志、运输和贮存。
本标准适用于在公路、城市交通隧道的混凝土结构表面使用的隧道防火保护板,铁路隧道可参照执行。

前言

没有内容

目录

没有内容

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB/T191 包装储运图示标志
GB/T7019—1997 纤维水泥制品试验方法
GB/T8626 建筑材料可燃性试验方法
GB/T9265 建筑涂料 涂层耐碱性的测定
GB/T9978.1 建筑构件耐火试验方法 第1部分:通用要求
GB14907 钢结构防火涂料
GB/T20284 建筑材料或制品的单体燃烧试验
GB/T20285 材料产烟毒性危险分级
GB50010 混凝土结构设计规范
GA/T714—2007 构件用防火保护材料快速升温耐火试验方法
JC/T646—2006 玻镁风管

所属分类: 医药 卫生 劳动保护 消防 消防设备与器材 环保 保健与安全 消防 建筑材料和构件的阻燃性
下载地址: 点击此处下载
Product Code:SAE J3000
Title:Thermoplastic Elastomer Classification System (Cancelled Oct 2009, Superseded by J2558)
Issuing Committee:Committee On Automotive Rubber Specs
Scope:This classification system tabulates the properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications.For the purposes of this document a TPE is defined as a polymeric material that, without further chemical modification, is capable of recovering from deformations quickly and forcibly and is also capable of being repeatedly softened by heating and hardened by cooling within a temperature range characteristic of the material.When the TPE product is to be used for purposed where the requirements are too specific to be completely prescribed by this classification system, it is necessary for the plurchaser to consult the supplier in advance to establish the apropriate propeties, test methods, and specification test limits.This classification system is based on the premise that the properties of TPEs can be arranged into characteristic material designations. These designations are determined by type, based on resistance to heat aging; and class, based on resistance to volume change resulting from oil immersion. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the propeties of all TPEs.In all cases where provisions of this classificaiton system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence.this classificaiton is based on SI units.【英文标准名称】:Toluene
【原文标准名称】:甲苯
【标准号】:JISK8680-2006
【标准状态】:现行
【国别】:日本
【发布日期】:2006-04-20
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JP-JISC)
【起草单位】:TechnicalCommitteeonChemicalAnalysis
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:この規格は,試薬として用いるトルエンについて規定する。
【中国标准分类号】:G63
【国际标准分类号】:71_040_30
【页数】:12P;A4
【正文语种】:日语